 |
| |||
|
Printer Canon iP5200 ink absorber full Use this link for instructions on how to remove/replace or clean the ip5200 See section 3-2 "Special notes on Repair Servicing" INSTRUCTIONS CLICK HERE Take out the sponge/absorbers and wash with soap and water, I used washing powder. Beware this is a very, very, very messy process, suggest doing outdoors if possible. Leave them ovenight to dry, then put back in the printer and re-assemble. To reset after replacing use these instructions :- 1. Turn off the printer 2. Hold down the RESTART button 3. Press the Power button and hold 4. Keep POWER button pressed and Release RESTART button 5. Press the RESTART button two times, lights flash alternately 6. Now release both POWER and RESTART buttons 7. Wait for a steady green light 8. Now press RESTART 4 times 9. Press POWER button 10. Press POWER button to switch off 11. Press POWER button to turn on 12. Test printer by connecting USB cable PICTURES First Electrical Connection which needs to be unplugged 
After unplugging First Connection 
Second Electrical Connection which needs to be unplugged 
After removing the second connection from the transformer, the transformer can be removed from underneath by pressing the 2 clips on either side of it 
Ink absorbers drying out after being removed and washed  IP | ||||
|
||||